SpeedyBee BT Nano 3

Product detailed description

Setup any FC unit of the FPV dronevia bluetooth in the SpeedyBee app.

Description:

• 5V operating voltage.
  
• Operating current:~10mA
  
• Bluetooth Low Energy: Supports
  
• WiFi: Supports. It will automatically turn on only when upgrading the firmware of the module itself.
  
• Communication port: UART
  
• Transfer rate: 115200
  
• Bluetooth Automatically Turns Off: Enabled by default, the module automatically detects FC guard/unguard status.
• During drone flight, the Bluetooth function will be disabled to prevent interference with other wireless devices by the Bluetoothsignal .
  
• BT Switch Pad: The Bluetooth function will be deactivated when it receives a weak signal. Refer to the BT Switch section of the manual for detailed instructions
  
• Power Indicator: Lights red to indicate that the module is powered.
  
• Working status indicator

1. Flashing white: Indicates that the UART communication with FC is abnormal, please check the wiring and settings are correct.
   
2. Lights white: Indicates that the communication with FC is normal, you can use the application to set the wireless parameters
   
3. Flashing green: Indicates that a wireless signal is being connected
   
4. Lights green: Indicates that the connection to the application was successful
   

• Dimensions: 14 x 11 x 0.8 mm
  
• Weight: 5g
  

Package Includes:

• 1x SpeedyBee BT Nano 3 W/ Pre-soldered wires
  
• 1 x 29 AWG 75mm wire
  
• 2 x 3M double-sided tape 14mm x 30mm
  
• 1 x 8mm shrink wrap