BETAFPV Toothpick F4 2-6S 35A AIO Brushless Flight Controller (BLHeli_32)

Product detailed description

The FC F4 AIO 35A is the first all-in-one with BLHeli_32 ESC 35A on the market today. It can handle 35A continuous current (40A burst), fully supports 2-6S lipo battery.
Compared with the BETA 35A AIO FC test, the solder pads to the motor are extended to prevent FC short circuit during soldering.
There are 3 full UARTs (UART1, UART2 and UART6) available on this board. Pilots could use one UART for a DJI digital FPV unit or Caddx Vista digital FPV unit and the other UART for an external receiver like the TBS Crossfire.
It includes a built-in 10V output BEC for the DJI digital VTX.

Specifications:

Specifications

FC

• Item: F4 35A AIO FC(BLHeli_32)
• Weight: 7g
• CPU: STM32F411CEU6
• Six-Axis: MPU6000 (SPI connection)
• Mounting hole size: 26mm*26mm
• Firmware version: BETAFPVF411 (BEFH)
• OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
• Support programmable LED like WS2812 etc
• Built-in current sensor

ESC

• Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
• Receiver: Support Frsky XM/XM+ Receiver/Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)
• Input voltage: 2S-6S Lipo
• Continuous current: 35A
• Peak current: 40A
• ESC firmware: BLHELI_32
• Indicators: 3 indicators: receiver indicator (green)/Flight control status indicator (blue)/Flight control power indicator (red)
• Capacitance: CS|5*10*17mm|680μF|35V
• Connecter: XT60U 14AWG
• Recommended motors: 140X series, 150X series, 160X series, 180X series

Package includes:

• 1 * Toothpick F4 35A AIO 2-6S brushless flight controller
• 1 * Cable Pigtail (XT60U)
• 1 * Capacitance
• 4 * M2x10mm Screws
• 8 * M2 Nuts
• 4 * Anti-vibration Rubber Dampers

Note: It is NOT recommended to use this board on full size/heavy 6S drones, there is a risk of burning. This is adapted for ultralight 3-5 inch toothpick frames.