6SFULL FPV brána
Product detailed description
6SFULL FPV Gate is a practical training element for racing, freestyle practice, and building a smaller FPV track. It is designed mainly for flying with 5" FPV drones, but it also works great for smaller copters, whoops, or precision gate practice. Thanks to the MultiGP 150 × 150 cm format, it offers enough space for fast approaches while still forcing the pilot to hold a precise line and improve overall drone control.
The textile part of the gate is designed to be used with a simple frame made from commonly available DN32 PVC pipes. The frame is not included in the package, so you can easily adapt the gate to your own needs, leg length, or preferred method of ground anchoring. For assembly, three PVC pipes and two 90° elbows are commonly used. An optional 3D model, GateCorner32mm, can be used for easier folding and transport by car.
The gate is ideal for FPV racing, race line training, open practice, club flying, and home training on a field. Thanks to its simple construction, it is easy to transport, quick to assemble, and easy to take apart after flying. It works well as a basic track element or as an addition to other obstacles, slaloms, and similar training elements.
The large square opening helps pilots practice proper approach angles, throttle control, precise cornering, and high-speed gate passes. For beginners, the gate is easy to see and safely large, while advanced pilots can use it to build fast technical sections focused on smoothness and consistency.
Key Features
• Textile part of an FPV gate for racing and training
• Suitable mainly for 5" FPV drones
• Large 150 × 150 cm opening
• Ideal for FPV racing, freestyle training, and open practice
• PVC pipe construction allows simple and affordable assembly
• Recommended pipe size: DN32
• Easy to transport, quick to assemble, and simple to store
• Suitable for building your own FPV track on a field, playground, or training area
• Helps improve flight precision, gate approaches, and overall drone control
Recommended Construction
To assemble the gate, the textile part must be combined with your own frame made from PVC pipes. Recommended setup:
• 3× DN32 PVC pipe, 2 m long each; the top pipe must be cut to match the width between the corners of the upper textile section
• 2× DN32 90° PVC elbow
The PVC pipe frame is not included in the package.
Package Contents
• 1× textile part of the FPV gate
